Showing posts with label Career. Show all posts
Showing posts with label Career. Show all posts

Thursday, December 30, 2021

Procedure for Calibration of Balances in pharmaceutical industry

 MONTHLY CALIBRATION OF BALANCES 

For monthly Calibration of Balances check following parameters-

1. Accuracy - verify the balance with minimum weight (least count × 100), 5%, 20%, 50%, 90% capacity of respective balance capacity.

Tolerance - the variation if any should be ± least count of the balance or ± 0.2% of certified standard weight used whichever is higher 

 2. Reproducibility - 

Check the reproducibility by using minimum standard weight of balance capacity. Place the weight in the middle of the weighing pan observe the displayed value 

Then calculate the %RSD by following formula 

RSD= SD×100 / X 

Where, 

X= mean of the individual value

Acceptance = %RSD should not be more than 2.0%

3. Eccentricity 

Eccentricity is the difference between the weight placed in centre and at peripheral points of the weighing pan 

Monday, August 20, 2018

Types of granulation in tablet formulation

TYPES OF GRANULATION
Granulation can be achieved by three method as follows :-
1. Direct compression   
      Crystalline substance like sodium chloride, sodium bromide may be compressed directly. The vast majority of medicinal agents are rarely so easy to tablet, direct compression material should posses good flow and compresibility and must be inert, tasteless, able to disintegrate and inexpensive.
Method
(Drug + filler + disintegrant + lubricant + glidant ) all are blend directly after sifting through Viber sifter and compressed


2. Dry Granulation
   It is used in situations where effective dose of a drug is too high for direct compaction and the drug is sensitive to heat, moisture, or both which preclude wet granulation. This is also called slugging method.
Method
A.      (Drug + filler + lubricant) All are.       blend then precompression done and     after that   comminution done
 
 B.  (glidant + lubricant + disintigrant)  sizing then blend with A

3. Wet Granulation
  Wet granulation forms the granules by binding the powders together with an adhesive, instead of by compaction. Liquid bridge are developed between particles, and the tensile strength of these bond increase as the amount of liquid binder added is increased. A drying process is required in all wet granulation to remove the solvent and to reduce the moisture content. After drying granulation is screened again, followed by compression.

Schematic drawing of All types granulation

Tuesday, October 10, 2017

Walk in for Alkem pharma Baddi on 14th October 2017 for

Walk in for Alkem pharma Baddi on 14th October 2017 for production, Quality control  and various positions
For experienced and fresher candidates

Friday, August 4, 2017

Walk in Sun Pharma at dehradun (U.K.) for production and quality control for Paonta ( H.P. ) (OSD) and Guwahati , Sikkim ( Parentral ) on 6th Aug 2017

Walk in Sun Pharma at dehradun (U.K.) for production and quality control for Paonta ( H.P. ) (OSD) and Guwahati , Sikkim ( Parentral ) on 6th Aug 2017


Thursday, August 3, 2017

WALK IN FOR ACME GENERICS LLP ON 5th AUG 2017


We are looking for Executive/Officers/Operators Position in QA/QC/Production/HR department for our manufacturing facility at North India
Find below detailed advertisement below
Who we are:
A Leading Pharma Group with Global Presence and approvals from EU-GMP, MHRA-UK, ANVISA Brazil, PICS Ukraine, WHO Geneva, INVIMA Colombia, USFDA*
We have 3 facilities in North India and 1 R&D centre at Bengaluru ,
1. Immacule Lifesciences- Manufacturing of Liquid and Lyophillized injections approved from MHRA, ANVISA, PICS Ukraine, USFDA Scheduled
2. Acme Formulation Pvt Ltd- Comprises of 2 blocks (General & Hormone) , manufacturing Tablets, Capsules approved by WHO Geneva
3. Acme Generics LLP - Comprises of 2 blocks (General & Thyroxine) , manufacturing Tablets, Capsules approved by EU-GMP
This position is for
Company Name: Acme Generics
Location: Baddi (Himachal Pradesh) near Chandigarh
Multiple Positions:
Production (Manufacturing) and Packing Operations-Experience in Coating/Granulation/ Compression/ Capsule/Alu- Alu/Blister/ Strip/ areas.
Quality Assurance- Experience in IPQA/QMS/Validation/ Qualification with thorough knowledge of cGMP norms.
Quality Control- Experience in Instrumental and chemical analysis i.e. RM/PM/FG/Validation/Micro/ Stability on instruments like HPLC, GC, UV, IR.
Human Resources- Experience in Recruitment/ Talent Acquisition /Payroll/ Liasoning / Statutory Compliances/Admin Activities.
Designation: Executives/Officers/Operators
Experience: 1- 8 years of experience in Pharmaceutical Industry
Educational Qualification: B. Pharma / M. Pharma / B. Sc / M. Sc / MBA H.R
Salary: Negotiable(Best in Industry)
Interview Venue:
Acme Generics LLP
Plot No. 115, HPSIDC Industrial Area, Davni, Manpura near Baddi (H.P)
Date & Time:
05th August 2017 (Saturday) ,
9:00 am onwards
Ph: 01795-332612-60
Contact: HR Team
Note: Candidates who are able to relocate to Baddi (H.P) and join us immediately can only apply
Interested and eligible candidates are advised to appear for WALK-IN along with updated CV, passport size Photograph and salary supportings.

Wednesday, August 2, 2017

Vacancy at Sun Pharma, Gujrat

Vacancy in Sun Pharma, the leading pharma API and Bulk formulation company across the globe,
at Panoli, Ankleshwar, Gujrat, India for the post of officer and Sr. officer in Quality Control , Quality Assurance and Production departments

 the interested candidates can send their updated resume to vashal.joshi@sunpharma.com

Friday, July 28, 2017

Walk in for Ind Swift laboratories ltd

Walk in for Ind swift laboratories ltd Chandigarh at 30 July 2017 and 31 July 2017 for both fresher and experienced candidates at multiple vacancies