Showing posts with label Walk In. Show all posts
Showing posts with label Walk In. Show all posts
Saturday, December 21, 2019
Tuesday, November 13, 2018
Basics and use of HVAC system in pharma
HVAC is an essential aspect in pharmaceutical industry as factors like temperature, relative humidity and ventilation have a direct impact on the quality of the pharmaceutical product. The designing of the HVAC should be sorted out while design concept of facility is in progress as it is linked to the architectural layouts like air locks, doorways and lobbies. Once the HVAC system is properly designed and installed it not only helps to create the required room pressure differential cascades but also prevents the cross contamination. Basically an HVAC system works by transferring the heat and moisture into and out of the air and controls the level of the air pollutant either by removing them or diluting them to a particular level.
TECHNOLOGY OVERVIEW:
HVAC system varies according to the size and installation capacity within a facility but the basic components remain almost the same.
LAYOUT OF A TYPICAL BASIC HVAC SYSTEM
HEATING SYSTEM:
The heat source is either a furnace or another popular choice is boilers that heat water for steam radiators, or forced-water systems with baseboard radiators, electric heat, and heat pumps. A furnace will generally operate on natural gas or propane, while a boiler will use gas or oil to heat the water. Furnaces are generally installed with central air conditioners. Heat pumps provide both heating and cooling. Some heating systems have an integrated water heating system. Another option is a hydronic heating system also called as radiant floor. These use piping under a floor, and are made up of flexible tubes that are filled with water or a glycol solution.
COOLING SYSTEM:
The purpose of cooling equipment is to chill the water for pumping to cooling coils. From one end the treated air is then blown over the chilled water coils into the space to be cooled through the ventilation system. As part of the refrigeration cycle in the chiller, heat must also be rejected from the system via a cooling tower or condenser.
DUCT LINES AND VENTILATION:
The ducts are used within the system to circulate both hot and chilled water in the building to the required areas. The stale air is expelled by using a separate duct line. The installation of duct lines is an important part therefore location and material type is considered at the time of designing of the HVAC system.
THERMOSTAT:
The thermostat (HVAC Controller) is installed to turn equipment on or off and to adjust the chillers and boilers, air and water flow rates, temperature and pressures. This also make the components work efficiently through the means of regulation of required conditions. A controller incorporating one or more temperature sensors inside the workspace sends a signal to the heating or cooling coils to activate.If there is a demand for heating or cooling then the controls may also send a signal to the chiller and boiler to operate as required. There are often other control panels on the chiller or boiler too, allowing users to have greater control.
TECHNOLOGY OVERVIEW:
HVAC system varies according to the size and installation capacity within a facility but the basic components remain almost the same.
LAYOUT OF A TYPICAL BASIC HVAC SYSTEM
HEATING SYSTEM:
The heat source is either a furnace or another popular choice is boilers that heat water for steam radiators, or forced-water systems with baseboard radiators, electric heat, and heat pumps. A furnace will generally operate on natural gas or propane, while a boiler will use gas or oil to heat the water. Furnaces are generally installed with central air conditioners. Heat pumps provide both heating and cooling. Some heating systems have an integrated water heating system. Another option is a hydronic heating system also called as radiant floor. These use piping under a floor, and are made up of flexible tubes that are filled with water or a glycol solution.
COOLING SYSTEM:
The purpose of cooling equipment is to chill the water for pumping to cooling coils. From one end the treated air is then blown over the chilled water coils into the space to be cooled through the ventilation system. As part of the refrigeration cycle in the chiller, heat must also be rejected from the system via a cooling tower or condenser.
DUCT LINES AND VENTILATION:
The ducts are used within the system to circulate both hot and chilled water in the building to the required areas. The stale air is expelled by using a separate duct line. The installation of duct lines is an important part therefore location and material type is considered at the time of designing of the HVAC system.
THERMOSTAT:
The thermostat (HVAC Controller) is installed to turn equipment on or off and to adjust the chillers and boilers, air and water flow rates, temperature and pressures. This also make the components work efficiently through the means of regulation of required conditions. A controller incorporating one or more temperature sensors inside the workspace sends a signal to the heating or cooling coils to activate.If there is a demand for heating or cooling then the controls may also send a signal to the chiller and boiler to operate as required. There are often other control panels on the chiller or boiler too, allowing users to have greater control.
Friday, May 25, 2018
Tuesday, September 19, 2017
Friday, August 4, 2017
Walk in Sun Pharma at dehradun (U.K.) for production and quality control for Paonta ( H.P. ) (OSD) and Guwahati , Sikkim ( Parentral ) on 6th Aug 2017
Walk in Sun Pharma at dehradun (U.K.) for production and quality control for Paonta ( H.P. ) (OSD) and Guwahati , Sikkim ( Parentral ) on 6th Aug 2017
Thursday, August 3, 2017
WALK IN FOR ACME GENERICS LLP ON 5th AUG 2017
We
are looking for Executive/Officers/Operators Position in
QA/QC/Production/HR department for our manufacturing facility at North
India
Find below detailed advertisement below
Who we are:
A
Leading Pharma Group with Global Presence and approvals from EU-GMP,
MHRA-UK, ANVISA Brazil, PICS Ukraine, WHO Geneva, INVIMA Colombia,
USFDA*
We have 3 facilities in North India and 1 R&D centre at Bengaluru ,
1.
Immacule Lifesciences- Manufacturing of Liquid and Lyophillized
injections approved from MHRA, ANVISA, PICS Ukraine, USFDA Scheduled
2.
Acme Formulation Pvt Ltd- Comprises of 2 blocks (General & Hormone)
, manufacturing Tablets, Capsules approved by WHO Geneva
3. Acme Generics LLP - Comprises of 2 blocks (General & Thyroxine) , manufacturing Tablets, Capsules approved by EU-GMP
This position is for
Company Name: Acme Generics
Location: Baddi (Himachal Pradesh) near Chandigarh
Multiple Positions:
Production
(Manufacturing) and Packing Operations-Experience in
Coating/Granulation/ Compression/ Capsule/Alu- Alu/Blister/ Strip/
areas.
Quality Assurance- Experience in IPQA/QMS/Validation/ Qualification with thorough knowledge of cGMP norms.
Quality
Control- Experience in Instrumental and chemical analysis i.e.
RM/PM/FG/Validation/Micro/ Stability on instruments like HPLC, GC, UV,
IR.
Human Resources- Experience in Recruitment/ Talent Acquisition /Payroll/ Liasoning / Statutory Compliances/Admin Activities.
Designation: Executives/Officers/Operators
Experience: 1- 8 years of experience in Pharmaceutical Industry
Educational Qualification: B. Pharma / M. Pharma / B. Sc / M. Sc / MBA H.R
Salary: Negotiable(Best in Industry)
Interview Venue:
Acme Generics LLP
Plot No. 115, HPSIDC Industrial Area, Davni, Manpura near Baddi (H.P)
Date & Time:
05th August 2017 (Saturday) ,
9:00 am onwards
Ph: 01795-332612-60
Contact: HR Team
Note: Candidates who are able to relocate to Baddi (H.P) and join us immediately can only apply
Interested
and eligible candidates are advised to appear for WALK-IN along with
updated CV, passport size Photograph and salary supportings.
Wednesday, August 2, 2017
Vacancy at Sun Pharma, Gujrat
Vacancy in Sun Pharma, the leading pharma API and Bulk formulation company across the globe,
at Panoli, Ankleshwar, Gujrat, India for the post of officer and Sr. officer in Quality Control , Quality Assurance and Production departments
the interested candidates can send their updated resume to vashal.joshi@sunpharma.com
at Panoli, Ankleshwar, Gujrat, India for the post of officer and Sr. officer in Quality Control , Quality Assurance and Production departments
Friday, July 28, 2017
Walk in for Ind Swift laboratories ltd
Walk in for Ind swift laboratories ltd Chandigarh at 30 July 2017 and 31 July 2017 for both fresher and experienced candidates at multiple vacancies
Friday, July 21, 2017
Tuesday, July 11, 2017
Tuesday, June 27, 2017
Wednesday, March 8, 2017
Subscribe to:
Posts (Atom)